|Place of Origin:||CHINA|
|Minimum Order Quantity:||1 meter|
|Packaging Details:||plywood case|
|Delivery Time:||15 working days|
|Payment Terms:||L/C, T/T|
|Dielectric:||30-40KV/mm||Spec.resistance:||5*10 15 Ohm*cm|
|Standard Housing:||-20°C Up To +70°C||Tensile Strength:||75N/mm2±10%|
crane busbar system
Soler Enclosed conductor rail system is a conductor, protected from contact (IP23),for indoor and outdoor plants. They are conductor lines in a rigid green PVC housingwith different copper cross sections for rated currents of 35-240A.
The current collectors, running in ball bearings, are guided by the housing.
The main is transferred by spring-stored carbon brushes.
Type HFP-P:not include Sealing strip, with factory-mounted flat copper band and bolted-operated plug connectors.
Type HFP-R:Curves for R≥800mm,with factory-mounted flat copper band and screw connectors.
Approved and listed by: CCC,ISO9001 and CE.
|Type||Weight(kg)||Remark [Be used for]|
|56CB-1||0.04||56JD series collector|
|56CB-2||0.04||56JDR series collector|
|Electrical properties:||Mechanical properties:|
|Max.current:240A||Flexible strength: 75N/mm2±10%|
|Max.voltage:690V||Tensile strength: 75N/mm2±10%|
|Dielectric strength:30-40KV/mm||Temperature range:|
|Spec.resistance:5x1015Ohmxcm||Standard Housing:-20°C up to +70°C|
|Surface resistivity:1013Ohmxcm||High Temp.Housing: -10°C up to +115°C|
|Leakage resistance:CT1600-2.7||Low Temp.Housing: -40°C up to +80°C|
|Flame retardant: Class B1-no flaming particles,self-extinguishing|
|Self extinguishing: Class B1-no flaming particles,self-extinguishing|
Resistance to chemicals:+45°C
Gasoline Sulphuric acid 50%
Mineral Oil Caustic soda 25%&50%
Grease Hydro-chloric acid, concentrated
Color green, plastic housing for 3-4 conductors. Standard section 4m.Other sections are available.
The ground conductor is identified by international color code.
Phase reversing prevented by design of the collector and housing.
Through plastic joint caps
Line feeds or end feeds
The open ends of the powerail are closed by end caps for HFP56.
Standard brackets for powerail attachment to crane girders are available .
Powerail with sliding and fixpoint hangers.
Standard distance between suspension points for indoor and outdoor.
Expansion during temperature fluctuation
The Expansion sections are required to compensate the different expansions between copper conductors and steel or concrete structures, in varying temperatures without interrupting electrical power.
These sections are used for transfer of the Powerail to outdoor areas to avoid condensation. The Powerail is not separated electrically.
Available as air gap version(5mm),where the collector carbon bridges the gap, e.g. for mains. Also available as insulating piece version(35mm). In this case the insulating piece is longer than the carbon and each Powerail section can be separated electrically, e.g. for control.
The current collectors are made of re-inforced polyester fiberglass, for high strength and light weight. Spring loaded carbon brushes maintain uniform contact. Connecting cables and hinged or flexible towing arms included. Double collectors for transfer applications and higher amperage.
Contact Person: Sunny