Home ProductsSteel Crane Rail

Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail

Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail

    • Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail
    • Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail
  • Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail

    Product Details:

    Place of Origin: China
    Brand Name: NANTE
    Certification: CE,ISO
    Model Number: P50

    Payment & Shipping Terms:

    Minimum Order Quantity: 100sets
    Price: USD1-100/pc
    Packaging Details: carton
    Delivery Time: Within two weeks
    Payment Terms: L/C, T/T
    Supply Ability: 100000 pcs/year
    Contact Now
    Detailed Product Description
    Material: Steel Model: GTXD50
    Rail Size: P50 Min. W: 232mm

    Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail

    Specifications

    Double wedge design
    Bolts incorporate a "Square Shank Base"
    Crane rail clamp

     

    COMPONENTS MATERIALS:

    P50 clip Gantrex Railok W10 is standard with a weldable forged steel lower component, a ductile cast iron upper component and vulcanize-bonded rubber nose. As standard, the bolts and nuts are hot dip galvanized.

    The upper component can also be hot dip galvanized on request. Contact GANTREX for other options.

     

    INSTALLATION AND SUGGESTED WELD INSTRUCTIONS

    The lower component is welded on the support parallel to the axis of the rail and the upper component is fastened
    to it by means of one bolt and nut. The recommended torque is 75 Nm. Electrical and pneumatic torque wrenches
    are allowed as long as the minimum torque of 60 Nm is met and the torque does not exceed 100 Nm.
    It is recommended the torque is regularly controlled with a calibrated torque wrench.
    For most applications, the recommended weld throat size isGantrex Railok brand P50 crane rail clamp 4 mm; the weld leg size is then 6 mm. If the pad
    is not used, the weld along the foot of the rail must be removed. Use any low hydrogen rod suitable for use with
    structural steel: ISO2560 type E 42 5 B 32 H5, E7018 or equivalent. For full instructions on weld size and electrodes,
    refer to the data sheet “Installation and suggested weld instructions”.
    Do not apply protective coating on the contact surface between upper and lower components unless accepted
    by GANTREX. Do not use solvents as they may seriously damage the rubber nose.

     

    CLIP SPECIFICATION

    The pending clips are specifically designed to facilitate correct mounting of crane rails :
    • The “Double Wedge Design” ensures tight contact with the rail foot.
    • Bolts with “Square Shank Base” allow the use of impact-wrenches.
    • Easier installation because of the wider adjustment range.
    • Compact design : fits narrow girders and soleplates, avoid interference with guide rollers.


    Once installed, the clips are self-locking and self-tightening.

    The features and functions of welding type rail clamp
    1, The floor of rail claping system uses three sides welding or two sides welding to the steel crane beam, can guarantee the crane horizontal force balance evenly delivered to the crane beam. The use of welded rail clamp avoids the defects of openings in the crane beam wing defects. Effectively improve the crane beam interface strength and carrying capacity.
    2, the base plate fastened with T-bolt by ball hinge connection. Therefore, under the action of lateral force, the T-bolt is vertical to the upper cover and allows deflection, reducing the crane horizontal impact to the rail, crane beam and braking system and other structural hazards. Thus extending the service life of the structure.
    3, the rail clamp is equipped with a slant adjustment plate, used to adjust the gauge, can improve the installation accuracy, reducing the center line straightness difference. And a two-way self-locking function to prevent the phenomenon of loosening during use.
    4, T rail bolt is easy to remove, providing a very convenient condition for installation and maintenance .
    5, The rail clamp upper plate matches the rail, can clamps the rail tightly without affecting the track micro-slipping along the vertical direction. It can also be used for full-track welding.

    Welding type rail clamp fastenings selection and layout
    1, according to the process of the proposed rail model, use the appropriate rail fixtures.
    2, the spacing of rail clamp fastenings to be determined by crane initial weight
    3, the baseplate to be welded with crane beam, electrode type selection should be compatible with the joint material. For example
    4, intermediate working system Crane beam using two sides weld, heavy (special heavy) work inverted crane using three sides weld.

     

    Rail Clamp for crane rail

    Model Rail Size A Min.W
    (mm)
    X1 with Pad
    (mm)
    X1 w/o Pad
    (mm)
    GTX55 A55 150 250

    14


    21
    GTX65 A65 175 275
    GTX75 A75 200 300
    GTX100 A100 200 300

     

    Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail


    Railway Track Clips Heavy Duty Steel Crane Rail Clamp Model Rail

     

     

    Contact Details
    Shaoxing Nante Lifting Eqiupment Co.,Ltd.

    Contact Person: Sunny

    Send your inquiry directly to us (0 / 3000)

    Other Products